Strooder takes approximately 3 hours to produce 1kg of ABS/PLA filament. This varies depending on the material and diameter of the filament you wish to produce in addition to the motor speed.
Strooder is approximately 16cm x 32cm x 22cm (width x length x height). Making it a relatively compact filament extruder.
Strooder can reliably produce filament with a tolerance of +-0.1mm.
Strooder can extrude most thermoplastics that melt below 250°C (482°F). It is always recommended to refer to a material's datasheet before attempting to extrude it.
The minimum amount of material required for extrusion is approximately 25g of regular PLA/ABS granules. There is an approximate volume of 20.05cm^3 (20050 cubic millimeters) inside the barrel.
Strooder comes with a standard 1 year warranty.
Currently delivery is between 20-30days.